Table of Contents
Advertisement
Priming
Before using the machine for the first time, remove
the protective film on upper surface 8bis and on the
cup grid 12.
Filling the water tank
• Open the water tank lid.
• Take out the tubes C from the tank.
• Remove the tank from its housing.
• Rinse the tank with water (do not use cleansing
products).
• Fill the tank with fresh water and fit it back into its
housing.
• Close the lid.
• Replace the tubes in the tank.
Fill the tank with cold drinking water only. Never
use milk, carbonated water or other liquids.
Never fill the tank when the machine is on, as
accidental spilling could prevent the machine
from operating correctly.
Turning on the machine
Press the main switch to turn on the machine and
the red light 2 will go on.
C
860008 - 850012 - 860009 - 860005 - 850001
Warning!
2
7 - 16
Advertisement
Table of Contents
