Removing A Drive From The Hp Advanced Docking Station Sata Swappable Bay - HP Advanced Docking Station Maintenance And Service Manual

Removing a drive from the HP Advanced Docking Station SATA swappable bay

Ä
CAUTION: To avoid playback distortion or damage to an optical disc, stop the disc and exit multimedia software before
removing an optical drive.
✎
If you use the HP Docking Station Lock, you must unlock the device before you can remove a drive from the
SATA swappable bay. For more information, refer to "Installing the HP Docking Station Lock" in this chapter.
To remove a drive:
1. Close all programs and complete all activities that are supported by the drive.
2. Stop the drive. Refer to the user guide for your docking station for instructions on how to do this.
3. Pull the lever to release the drive 1.
4. Slide the drive out of the bay 2. After the drive is removed, the lever will return to the closed position.
Maintenance and Service Guide
Removal and replacement procedures
4–1 1