Hp Advanced Docking Station - HP Advanced Docking Station Maintenance And Service Manual

External component identification

HP Advanced Docking Station

Item Component
(1)
Security cable port
(2) Security cable D-ring tab
(3) Mouse connector
(4) Parallel port
(5) Monitor stand port
(6) Digital video interface port
(7) Powered USB 2.0 port
(8) Digital video interface
(9)
Power light
2–8
Description
Connects an optional HP Docking Station Lock security cable.
✎
A security cable is designed to act as a deterrent, but it may not prevent
the computer or the docking station from being mishandled or stolen.
Secures an optional security cable to the docking station.
Connects a PS/2 mouse.
Connects a parallel device such as a printer.
Connects an optional HP Monitor Stand to the docking station.
The DVI port connects a single-link DVI-D device such as a flat-panel monitor.
✎
The DVI port and DP within the same group cannot be used at the
same time. When you connect a device to the DVI port and then
connect a second device to the DP, only the device connected to the
DP will work. Use only one of the ports at a time. If the DVI port and DP
are located in different groups, you can use both DVI ports, both DPs,
or a combination of the two ports.
Connects an HP external USB optical drive or hard drive. Other USB hard
drives can be connected to this port even when the computer is off or
undocked.
The DVI port connects a single-link DVI-D device such as a flat-panel monitor.
✎
The DVI port and DP within the same group cannot be used at the
same time. When you connect a device to the DVI port and then
connect a second device to the DP, only the device connected to the
DP will work. Use only one of the ports at a time. If the DVI port and DP
are located in different groups, you can use both DVI ports, both DPs,
or a combination of the two ports.
■
On: The computer is on.
■
Off: The computer is off.
Maintenance and Service Guide