HP Advanced Docking Station Maintenance And Service Manual page 30

Lock position
0
1
2
To install the security cable and lock:
1. Loop the cable around the stationary object.
2. Insert the security cable connector into the security cable lock slot at the back of the docking station.
3. Remove the lock bezel blank from the docking station 1.
4. With the lock and key in the 0 position, insert the cable lock into the dock lock slot on the right side of the
docking station 2.
Maintenance and Service Guide
Voltage protection level
Use this position to install or remove the lock and security cable. In this
position, all equipment is unsecured:
■ The key cannot be removed from the lock.
■ The lock can be installed or removed.
■ The security cable can be installed or removed.
■ The computer can be docked or undocked.
Use this position to secure equipment, as follows:
■ The key can be removed from or inserted into the lock.
■ The lock is secured.
■ The security cable is secured.
■ The docking station is secured.
■ The computer can be docked or undocked and is unsecured.
In this position, all equipment is secured, as follows:
■ The key can be removed from or inserted into the lock.
■ The lock is secured.
■ The security cable is secured.
■ The docking station is secured.
■ The docked computer is secured.
Removal and replacement procedures
4–9