HP Advanced Docking Station Maintenance And Service Manual page 17

Item Component
(10) Computer lock slot
(11) Keyboard connector
(12)
Serial port
(13)
External monitor port
(14)
Display port 1
(15) Smart charging USB port
(16) Display port 2
(17) Power connector
(18) RJ-45 (network) jack
Maintenance and Service Guide
Description
Connects an optional security lock to the docking station.
✎
A security cable is designed to act as a deterrent, but it may not prevent
the computer or the docking station from being mishandled or stolen.
✎
Supports all industry-standard cable locks.
Connects a PS/2 keyboard.
Connects a serial device such as a mouse.
Connects an external VGA monitor.
The DP connects either an HDMI or DVI device using the appropriate adapter.
✎
The DVI port and DP within the same group cannot be used at the
same time. When you connect a device to the DVI port and then
connect a second device to the DP, only the device connected to the
DP will work. Use only one of the ports at a time. If the DVI port and DP
are located in different groups, you can use both DVI ports, both DPs,
or a combination of the two ports.
Connects and charges a USB device even when the computer is off or
undocked.
✎
If a USB hard drive is connected to this USB port, the hard drive does
not turn off. This USB port does not turn off when the computer is
turned off or is undocked.
✎
HP recommends connecting a hard drive to a USB port that turns off
when the computer turns off.
The DP connects either an HDMI or DVI device using the appropriate adapter.
✎
The DVI port and DP within the same group cannot be used at the
same time. When you connect a device to the DVI port and then
connect a second device to the DP, only the device connected to the
DP will work. Use only one of the ports at a time. If the DVI port and DP
are located in different groups, you can use both DVI ports, both DPs,
or a combination of the two ports.
Connects an AC adapter.
Connects a network cable.
External component identification
2–9