Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP Advanced Docking Station Maintenance And Service Manual

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:
■
Flat-bladed screwdriver
■
Phillips P1 screwdriver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly and
assembly procedures.
✎
As you remove each subassembly from the docking station, place the subassembly (and all accompanying
screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the
plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Cables and connectors
Ä
CAUTION: When servicing the docking station, be sure that cables are placed in their proper locations during the reassembly
process. Improper cable placement can damage the docking station.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the
cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid bending,
twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or snagged by
parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
Maintenance and Service Guide

Removal and replacement procedures

Removal and replacement procedures
4
4–1