Function Display; Microphone Connector - Icom X BAND 50 Instruction Manual

Vhf-uhf fm repeater
Table of Contents

Advertisement

■ Front Panel
AF VOLUME CONTROL KNOB
Rotate the knob to adjust the audio output
level.
• Minimum audio level is pre-programmed.

FUNCTION DISPLAY

Displays a variety of information, such as an
operating channel number/name.
NOTE: The above functions depend on
pre-programming.
POWER SWITCH [POWER]
Push to turn the power ON and OFF.
• The following functions are available at
power ON as options:
- Automatic scan start
-Password prompt
-Set mode
PANEL DESCRIPTION 1
DEALER-PROGRAMMABLE KEYS
[P0] to [P3]
Desired functions can be programmed
independently by your dealer.

MICROPHONE CONNECTOR

Connect the supplied microphone or optional
DTMF microphone.
CHANNEL CONTROL KEYS
NEVER connect non-specified microphones.
The pin assignments may be different and
the transceiver may be damaged.
2

Advertisement

Table of Contents
loading

Table of Contents