Manual Setup - Canon XC10 Instruction Manual

Wireless Connections Using Wi-Fi

Manual Setup

If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the
instructions on the screen to complete the procedure.
To enter text for the various settings, use the virtual keyboard (A 121).
122
1 Press the MENU button.
2 Open the [Access Point Connection] submenu.
[— Wi-Fi Setup] > [1] > [Access Point Connection]
3 In the access point selection screen, touch [Not configured] and
then touch [Manual Setup].
4 In the [SSID] (network name) field, touch [Not configured].
• Enter the SSID (network name) of the selected Wi-Fi network.
5 In the [Authentication/Encryption Method] field, touch [OPEN NONE] and then touch the desired
method.
• If you selected [OPEN WEP], the WEP index is 1.
• If you selected [OPEN NONE], skip to step 6.
6 In the [Encryption Key] field, touch [Not configured].
• Enter the encryption key.
7 Touch [Automatic] or [Manual] to select how to obtain the IP address.
• If you selected [Automatic], proceed to step 12.
8 In the [IP Address] field, touch [0.0.0.0]. Touch the first field and touch [Í]/[Î] to change the value.
Change the rest of the fields in the same way and then touch [OK].
9 Enter the [Subnet Mask] field in the same way and then touch [Next].
10 Enter the [Default Gateway] field in the same way and then touch [Next].
11 Enter the [Primary DNS Server] and [Secondary DNS Server] fields in the same way and then touch
[Next].
12 When the confirmation screen appears, touch [OK] and then touch [X].
IMPORTANT
• The Wi-Fi functions available and the setup method will vary depending on the specifications and
characteristics of the Wi-Fi network you want to use.
Table of Contents
[Access Point Connection]
Menus
[— Wi-Fi Setup]
[1]
Index