Manual Setup - Canon Legria mini Instruction Manual

Wireless Connections Using an Access Point
■

Manual Setup

Perform this procedure to manually configure the wireless con-
nection settings. This may be necessary, for example, if your
access point's network name (SSID) cannot be detected due to
the stealth function being enabled. Manual setup is for advanced
users of Wi-Fi networks.
To enter text for the various settings, use the virtual keyboard
(A 168).
1
In the [SSID] field, enter the SSID. Touch [OK] and then In the [SSID] field, enter the SSID. Touch [OK] and then In the [SSID] field, enter the SSID. Touch [OK] and then
touch [Next].
2
In the [Authentication/Encryption Method] field, touch In the [Authentication/Encryption Method] field, touch In the [Authentication/Encryption Method] field, touch
[OPEN NONE] and then touch the desired method. [OPEN NONE] and then touch the desired method. [OPEN NONE] and then touch the desired method.
• If you selected [OPEN WEP], the WEP index is 1. • If you selected [OPEN WEP], the WEP index is 1. • If you selected [OPEN WEP], the WEP index is 1.
3
In the [Encryption Key] field, enter the encryption key. In the [Encryption Key] field, enter the encryption key. In the [Encryption Key] field, enter the encryption key.
Touch [OK] and then touch [Next]. Touch [OK] and then touch [Next]. Touch [OK] and then touch [Next].
• If you selected [OPEN NONE] in step 2, this step is not • If you selected [OPEN NONE] in step 2, this step is not • If you selected [OPEN NONE] in step 2, this step is not
necessary.
4
Touch [Automatic] or [Manual] to select how to obtain
the IP address.
• If you selected [Automatic], proceed to step 9.
169