Creating A User-Defined Look - Canon XC10 Instruction Manual

Using Looks
Adjusting the Settings of a Pre-installed Look
1 Touch [ ].
2 Adjust the desired setting by touching [-] or [+].
64 • [Sharpness]: 0 (low sharpness) to 7 (high sharpness)
1
[Contrast] :
2
[Color Depth] : -4 (shallower colors) to +4 (richer colors)
1
Not available for [
2
Not available for [

Creating a User-defined Look

You can create your user-defined looks based on one of the pre-installed looks. The camcorder can store two
user-defined looks for clips and two for photos.
1 Touch [FUNC.] and then touch
2 Select which user-defined setting icon to use.
v User Setting 1] or [
• Select [
{ User Setting 2] for photos.
[
3 Touch and then touch [Standard].
4 Select the look that will be the basis of the user-defined look.
• The settings for [
5 Touch [Yes] and then touch [OK].
6 Adjust the settings as described in the previous section.
7 Touch [X].
Table of Contents
-4 (low contrast) to +4 (high contrast)
Wide DR].
Sepia] and [ Monochrome].
[Looks].
Canon Log] cannot be adjusted.
v User Setting 2] for clips and [
Menus
{ User Setting 1] or
Index