Remote Operation Using Browser Remote - Canon XC10 Instruction Manual

Remote Operation Using Browser Remote

After completing the necessary preparations (A 125), you can start and stop recording from a connected
device using the Browser Remote application.
Operating modes:
1 Press [LIVE VIEW ON/OFF] to show the camcorder's live view image on the Browser Remote screen.
• The position of the camcorder's movie/photo switch will determine whether the Browser Remote screen
displays controls for recording clips or taking photos.
To shoot clips
2 Press [START/STOP].
• The recording operation indicator changes to [ÜREC] and the center of the START/STOP button lights up
in red.
• The time code displayed on the Browser Remote screen is the same as on the camcorder.
• Press [START/STOP] again to stop the recording.
To take photos
2 Press [PHOTO].
NOTES
• The Browser Remote application has a key lock function that is limited only to the controls on the application's
screens (you will still be able to use the controls on the camcorder). Press [D] to lock the application's
controls; press [C] to reactivate them.
Table of Contents
Screenshot for recording clips
Menus
Recording Video and Taking Photos
Recording operation
Time code
Index
41