Using An Optional Speedlite Flash - Canon XC10 Instruction Manual

Using an Optional Speedlite Flash

Using an Optional Speedlite Flash
Using an optional EX-series Speedlite for EOS cameras (270EX II, 320EX, 430EX II, 580EX II, 600EX-RT), you
can enjoy flash photography with this camcorder. If you use the optional 320EX Speedlite, you can use its LED
94
light (video light) when recording clips.
For details about using a Speedlite, refer to its instruction manual.
Attaching the Speedlite
Configuring an Attached Flash
Depending on the Speedlite used, the following flash settings may be
available: flash mode, flash exposure compensation, flash output level,
high-speed sync. You can also reset the flash settings.
Operating modes:
1 Press the MENU button.
2 Open the [Flash] submenu.
[{ Camera Setup] > [2] > [Flash]
To set the flash mode
3 Touch [Flash Mode].
4 Select [k Automatic] or [n Manual] and then touch [K] to configure other flash settings or [X] to
close the menu.
Table of Contents
Menus
[{ Camera Setup]
[2]
[Flash]
Index