Using An Assignable Button - Canon XC10 Instruction Manual

Assignable Buttons

Using an Assignable Button

After you assign a function to one of the assignable buttons, press the button to activate the function.
98
Assignable Functions
Functions can be set separately depending on the operating mode. Refer to the following table for assignable
functions and available modes.
Function name
[ DISP.]
[ Push AF]
[^ Magnification]
[ Zebra]
[O Peaking]
[ Digital Tele-conv.]
[ Powered IS]
[ ND Filter]
[¯ Start / Stop]
[ Photo]
Table of Contents
Description
Switches what onscreen displays are shown.
Holding the button pressed down switches the LCD
backlight between bright and normal settings. If the
LCD backlight set to dim when you press the button, it
will first change to the normal setting.
Activates Push AF.
Turns magnification on/off.
Activates zebra patterns in the following sequence:
70% 100% Off
Turns peaking on/off.
Turns the digital tele-converter on/off.
Turns Powered IS on/off.
Turns the ND filter on/off.
Starts and stops recording a clip.
Takes a photo.
Ü Ü
Ü Ü
Ü Ü
Ü Ü
Ü Ü
Ü
–
Ü
–
Ü Ü
Ü
–
Ü
–
Menus
A
Ü Ü
138
– – 71
– – 69
– – 74
– – 69
– – 65
– – 73
– – 134
– – 37
– – 37
Index