Start-up
Burn hazard / scalding hazard
• When dispensing beverages, hot liquid comes
out of the spouts. The adjacent surfaces and
spouts become hot.
> When dispensing beverages, do not reach
beneath the spouts.
> Do not touch the spouts immediately after
dispensing.
Start-up complete
DI_02_09_12
your selection pls
08:15
02.04.2014
Setting options
• Cup volumes (Cup size) w page 32
• Change recipes w page 33
• Basic settings w page 36
• Set grinding degree w page 43
22
A brewing test is performed following the end of
the start-up program.
The beverage button flashes.
Place a suitably sized cup under the combi
spout
Press the flashing beverage button
Brewing test starts.
The coffee grinder will be filled with coffee beans
during the brewing test.
Discard this first cup of coffee
The coffee machine is now ready for use.
Start-up is complete. All settings can be changed
now, or at a later time.
CaUtion
Observe the Safety chapter
w starting on page 4
User Manual WMF 1200 F