Start-up
3.2.1
Determine the water hardness
Request water hardness reading from water
supplier, or determine using WMF carbonate
hardness test (complete with instructions) in the
accessories
The unit used is the "Deutsche Karbonathärte"
= °dKH (gpg)
3.3
Constant water supply
Carefully insert the seals attached to connecting
tube
Connect the rear connection of coffee machine
and the on-site water tap or water filter with the
connecting tube
Read and follow water filter instructions.
Check connections for leaks and tighten if
necessary
Turn on water
3.4
Drain connection
Push drain tube with angle piece onto water drain
connection onto rear of machine
Connect drain tube to mains drain via an S-trap
Tube must not sag.
Shorten hose if necessary
3.5
grounds container
Push combi spout all the way up
Remove the grounds container and any accessories
Insert the grounds container until it stops
18
User Manual WMF 1200 F