Water Hardness - WMF 1200F User Manual

DI_02_09_10

Water hardness

water hardn.:
OK: P change: -/+
Carbonate hardness test
w Included accessories
DI_02_09_09
Capacity
capacity: x
OK: P change: -/+
DI_02_09_11
SB mode (self-service mode)
SB mode: no
OK: P change: -/+
PIN entry and PIN protection
DI_02_09_07
w page 40
place 5L container
under spout
DI_02_09_08
heating up ...
User Manual WMF 1200 F
with water tank filter, or with no filter
20
The hardness of the drinking water being used.
Enter the result of the carbonate hardness test
here.
™ Confirm the desired setting with
... with water filter
The capacity of the water filter is set here.
(The capacity of the water filter can be found in
the water filter documentation.)
™ Confirm the desired setting with
When set to
displayed. Pressing and holding the P pad
(> 3 seconds) causes the functional pads to
reappear.
The SB mode function can be protected by a PIN.
™ Place a collection container with approx.
1.3 gal (5 Liters) capacity under the combi
spout
When rinsing the filter, you will hear unusual
noises. This is normal.
The noises will end during the filter rinse.
... all coffee machines
Coffee machine heats up.
A warm-up rinsing follows the heating-up
process. This warms up all the pipes.
After each brewing cycle, in the heating up phase
and during the care programs, release water runs
into the drip tray.
™ Place a collection container with 4 fl oz
(120 ml) capacity under the combi spout
The warm-up rinsing lasts approx. 40 seconds.
Start-up
, the functional pads are not
yes
21