Cab-1 Numeric Keypad Commands For Your Locomotive - Lionel Heisler Owner's Manual

TrainMaster Command operations

CAB-1 numeric keypad commands for your locomotive

W hen you press AUX1 on CAB-1, you turn the numeric keypad
into ten command buttons. The keypad "stays open" and
gives you access to extra command features until you press any top-
row button (SW, ACC, RTE, TR, or ENG). The CAB-1 keypad
overlay included with your locomotive is designed to help you learn
the auxiliary features specific to this classic locomotive.
Locomotive RailSounds effects in bold italic.
0 Stops and resets the locomotive to
FORWARD. Headlight flickers.
1 Raises the volume of RailSounds.
Sound volume increases.
2 CrewTalk is the sound of
unintelligible walkie-talkie
communication.
3 Starts-up RailSounds. Start-up
sequence commences. Steam
blow-off sound.
4 Lowers the volume of RailSounds.
Sound volume decreases.
5 Activates the RailSounds steam
shutdown sequence. Just like the real
thing, your locomotive must be idle
for shutdown to occur. Steam
shutdown commences. Remember,
the whistle and bell will not sound until
you restart RailSounds. CrewTalk
sounds*.
6 Steam release sound.
7 TowerCom is an audible two-part an-
nouncement that includes that engine's
road number and/or name. Pressing
AUX1, 7 triggers a "Hold for
clearance" announcement. Press 7
again, and a "Cleared for departure"
message plays. There is a four second
delay in this function.
8
Turns off the smoke generator.
Steam release sound*.
9 Turns on the smoke generator. Steam
blow-off sound*.
* Hearing the Steam release sound, Steam
blow-off sound, or the CrewTalk sounds
lets you know that the locomotive has
received these commands.
AUX1, 8 and 9 only work if the
Note!
smoke unit switch is in the ON
position. See Figure 3 on page 6
for the switch locations.
14
START-UP
CREW
BLOW
TALK
OFF
VOLUME
STEAM
SHUT
RELEASE
DOWN
SMOKE
TOWER
OFF ON
COM
ENGINE
RESET
STEAM