4
4
Initial Settings of This Machine
4.1
Preparation for network connection (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 2-3.
Assigning an IP address
If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel, select [Utility] - [Administrator Settings] - [Network Settings] - [TCP/IP Settings] - [IPv4
Settings], then configure the following settings.
Settings
[IP Address]
[Subnet Mask]
[Default Gateway]
[IP Application Method
Auto Setting]
Tips
To check the IP address assigned to this machine, print out the Configuration Page. To print out the Config-
uration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Configuration Page].
4-2
Preparation for network connection (for administrators)
Description
When manually specifying the IP address, enter the fixed IP address assigned
to the machine.
When manually specifying the IP address, enter the subnet mask.
When manually specifying the IP address, enter the default gateway.
When automatically specifying the IP address, select the method for automatic
retrieval.
•
[DHCP Settings]: [ON] is specified by default.
•
[BOOTP Settings]: [OFF] is specified by default.
•
[ARP/PING Settings]: [OFF] is specified by default.
•
[AUTO IP Settings]: Fixed to [Enable].
4.1
[Quick Start Guide]