Konica Minolta bizhub c3350 Quick Start Manual page 59

5
4
Select a file to print, then tap [Print].
% Tap [Up] to move upward.
% Tap [Open] to open the folder and move downward.
5
If necessary, change print settings, then tap [Print].
Settings
[Paper Size]
[Duplex]
[Finishing] - [Collate]
[Finishing] - [Offset]
[Finishing] - [Staple]
5-20
Description
Select the size of paper for printing. The paper size can be specified when the
selected file type is TIFF or JPEG.
Select whether or not to print data on one side or both sides of sheets of paper.
To print data on both sides, select the binding position.
When printing data by multiple copies, select whether or not to feed out copies
separately one by one like "12345", "12345", and "12345".
Staggers each set of copies when they are output.
This function is only available when bizhub C3850FS is used.
Staple each set of printed sheets of paper in a corner before feeding them out.
This function is useful when preparing a project proposal or other booklet ma-
terials.
This function is only available when bizhub C3850FS is used.
Printing a file stored on USB memory 5.5
[Quick Start Guide]