Panasonic WV-CS854A Operating Instructions Manual page 6

4. Do not use strong or abrasive detergents
when cleaning the camera body.
Use a dry cloth to clean the camera when it
is dirty.
When the dirt is hard to remove, use a mild
detergent and wipe gently. Care should be
taken not to scratch the dome when wiping
it.
Afterwards, wipe off the remained part of the
detergent in it with a dry cloth.
5. Never face the camera towards the sun.
Do not aim the camera at bright objects.
Whether the camera is in use or not, never
aim it at the sun or other extremely bright
objects. Otherwise, blooming or smear may
be caused.
6. Never face the camera towards a place
exposed to light sources for a long time.
If light sources such as spot light cause
burn-in on the display screen, part of image
may discolor due to deterioration of color fil-
ter in CCD when changing aim of the cam-
era etc.
7. Do not install this camera upside down.
This camera is designed for mounting on the
ceiling or wall. Using this camera installed
upside down, for example, mounted on the
floor, may cause malfunction.
8. If "OVER HEAT" sign appears on the
monitor screen.
The temperature inside the camera exceeds
the normal level because of a malfunction of
the cooling fan etc. Turn the power off imme-
diately and refer servicing to qualified ser-
vice personnel.
9. Do not operate the camera beyond the
specified temperature, humidity or power
source ratings.
Do not use the camera in an extreme envi-
ronment where high temperature or high
humidity exists. Do not place near heat
sources such as radiators, stoves or other
units that produce heat.
Use the camera under conditions where
temperature is between –10˚C - +50˚C (14˚F
- 122˚F) [Recommended temperature: +40˚C
(104˚F)], and humidity is below 90 %. The
input power source is AC 24 V.
6
10. Do not install the camera near the air out-
let of an air conditioner.
The lens may become cloudy due to con-
densation if the camera is used under the
following conditions.
• Rapid temperature
switching the air conditioner on and off.
• Rapid temperature fluctuations due to
frequent door opening and closing.
• Use in an environment where eyeglas-
ses become foggy.
• Use in a room filled with cigarette smoke
or dust.
If the lens becomes cloudy due to con-
densation, remove the dome cover and
wipe all moist surfaces with a soft cloth.
11. Consumables
Parts having contacts such as the lens-drive
motors, cooling fan motor and slip-rings built
inside the camera are subject to wear with
time. About replacement and maintenance
of such parts, please ask the nearest service
center.
12. Do not aim the camera at the same object
for a long time.
Burn-in of an image may be caused on the
fluorescent screen of CRT.
• Matsushita Electric
Herewith declares that it will not be liable for
any damage, whether direct or indirect,
caused by using for business transaction or
security, or malfunctioning of this product.
CAUTION
To prevent fire or electric shock hazard, use a
UL listed cable, VW-1, style 1015, AWG 18 or
UL listed power supply cord, type SJT should
be used for the cable for the 24 V AC input
terminals.
fluctuations by
Industrial Co., Ltd.