Panasonic WV-CS854A Operating Instructions Manual page 27

Note: Area titles appear in reverse video until the origin is set.
3. Move the cursor to PUSH SET on the ZOOM/FOCUS line, then
press the CAM (SET) key. ZOOM/FOCUS is highlighted and "U
ZOOM D/L FOCUS R" appears.
4. Move the joystick to adjust the zoom or focus.
5. Move the cursor to POSI
display position of the area title appears on the monitor. If need-
ed, change the display position by moving the joystick, then press
the MON (ESC) key.
An area title is always displayed under the camera ID.
If the camera ID and an area title are set to be shown in separate
positions, the area title display position has priority over the cam-
era ID setting.
6. Move the cursor to RET, then press the CAM (SET) key. SPECIAL
1 menu appears again.
Setting [ON (USER)]
If ON (USER) is selected on the SPECIAL 1 menu, the Area Title
selection menu appears. The screen has the number column and
title column above RET and RESET.
Note: The area numbers followed by an asterisk * have already
preset.
1. To select a camera direction, move the cursor to the desired num-
ber, then press the CAM (SET) key. The direction menu of the
selected number appears.
2. Adjust PAN/TILT, ZOOM/FOCUS and display position in the as
same way as AREA TITLE, DIRECTION (NESW). See page 27.
3. To add a user-customized title, move the cursor to the title of the
desired number, then press the CAM (SET) key. AREA TITLE
menu of the selected number appears.
AREA TITLE Editing
1. Move the cursor to the desired character in the character field
using the joystick then press the CAM (SET) key.
2. The selected character appears in the editing field and the blink-
ing cursor moves one position to the right.
3. Repeat steps 1 and 2 until one area title is completed.
4. Move the cursor to POSI
display position of the area title appears on the monitor. If need-
ed, change the display position by moving the joystick, then press
the MON (ESC) key.
28
, then press the CAM (SET) key. The
, then press the CAM (SET) key. The
ZOOM/FOCUS setting menu
** DIRECTION(NESW) **
PAN/TILT PUSH SET
p
ZOOM/FOCUS PUSH SET
p
POSI
U ZOOM D/L FOCUS R
+
N
RET
Display Position setting menu
FLOOR 1
N
SPECIAL 1 menu
** SPECIAL 1 **
PRIVACY ZONE OFF(ENB)
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
PASSWORD LOCK OFF
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
RET
AREA TITLE (USER) selection menu
** AREA TITLE(USER) **
1* NORTH
2
3 EAST
4 SOUTH-EAST
5 SOUTH
6 SOUTH-WEST
7
8 NORTH-WEST
RET RESET
DIRECTION (USER) setting menu
** DIRECTION(USER) 1 **
PAN/TILT PUSH SET
p
ZOOM/FOCUS PUSH SET
p
+
NORTH
RET DEL