Panasonic WV-CS854A Operating Instructions Manual page 31

2. Press the CAM (SET) key.
ON: The camera sends an alarm output signal via the coaxial cable after it turns to a preset position.
OFF: The camera does not send the output signal.
Notes:
• The camera ignores alarm inputs during manual operation.
• Select OFF when the camera downloads or uploads the preset data.
Password Lock (PASSWORD LOCK)
Caution: For security, do not operate your VCR for recording while the
password menus are displayed on the monitor.
A 3-digit number is used for a password to limit access to the privacy
zone settings.
1. Move the cursor to PASSWORD LOCK, then select ON or OFF by
moving the joystick to the right or left.
Note: ON or OFF can be changed only after going through the
password verification.
OFF: Access to the privacy zone settings is free. (ENB) follows
after ON or OFF of PRIVACY ZONE on the SPECIAL 1 menu.
ON: Access is limited by the verification menu. (DIS) follows ON
or OFF of PRIVACY ZONE on the SPECIAL 1 menu.
2. Press the CAM (SET) key.
PASSWORD VERIFICATION
3. The password verification menu appears.
3-1 Select a numeral for the first digit by moving the joystick to the right or left, then press the CAM
(SET) key. Though the entered password is not displayed, the up-arrow moves one character to
the right.
3-2 Repeat the above step for the 2nd and 3rd digits.
Default : 123.
3-3 The cursor moves to OK after all the three digits have been entered. Except for changing the
password to a new one, press the CAM (SET) key.
If the correct password is entered, the screen returns to SPECIAL 1. The ON or OFF set on the
SPECIAL 1 menu is as set in step 1.
If a wrong password is entered, the screen returns to the verification menu. Repeat steps 3-1 to
3-3 to verify the password.
3-4 To cancel a password incomplete or of a wrong number, move the cursor to RESET or OK, and
press the CAM (SET) key. The screen returns to the verification menu.
3-5 To return to the SPECIAL 1 menu without verifying the password, move the cursor to RET, then
press the CAM (SET) key.
NEW PASSWORD
4. To change the password in step 3-3 above, move the cursor from
OK to NEW PASSWORD, then press the CAM (SET) key. NEW
PASSWORD menu appears.
Notes:
• NEW PASSWORD menu is accessible only after the verifica-
tion has been completed.
32
Special 1 menu
** SPECIAL 1 **
PRIVACY ZONE OFF(ENB)
PROPO.P/T ON
AREA TITLE ON(USER)
PATROL STOP
ALARM IN/OUT
PASSWORD LOCK ON
CLEANING OFF
EL-ZOOM ON
PRESET ALM OFF
IMAGE HOLD OFF
RET
PASSWORD
** PASSWORD? **
0 1 2 3 4 5 6 7 8 9
. . .
OK RESET
NEW PASSWORD
RET
NEW PASSWORD
** NEW PASSWORD? **
0 1 2 3 4 5 6 7 8 9
. . .
. . .
OK RESET
RET