1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security Camera
  5. WVCS554 - COLOR CAMERA
  6. Operating instructions manual

Panasonic WV-CS554 Operating Instructions Manual

Combination camera
Hide thumbs Also See for WV-CS554:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions Manual
Combination Camera

Operating Instructions

WV-CS554
Model No.
WV-CS854
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic WV-CS554

Summary of Contents for Panasonic WV-CS554

  • Page 1: Operating Instructions

    Combination Camera Operating Instructions WV-CS554 Model No. WV-CS854 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.

  • Page 2: Table Of Contents

    CONTENTS PREFACE ............DIGITAL FLIP ON/OFF ......22 FEATURES ............. LOCAL/REMOTE Setting ......23 PRECAUTIONS ..........SPECIAL 1 ..........23 CONSTRUCTION ........... Camera Setting ........32 SETUP ............RS485 Set Up ......43 Setup Menu ..........INSTALLATION ..........45 Setup Menu Description ......CONNECTIONS ..........

  • Page 3: Preface

    PREFACE Panasonic presents highly advanced CCTV tech- 22 times zoom lens in a compact enclosure. A nology that meets the demands of new and ever- newly developed 1/4-inch CCD is employed for changeing applications. use under extremely low light conditions. It also...

  • Page 4: Precautions

    PRECAUTIONS 1. Do not attempt to disassemble the cam- 7. If “OVER HEAT” sign appears on the era. monitor screen To prevent electric shock, do not remove The temperature inside the camera exceeds screws or covers. the normal level because of a malfunction of There are no user serviceable parts inside.

  • Page 5: Construction

    CONSTRUCTION y Camera Mounting Base q Alarm Input Connector u Panning Start Point w Alarm Output Connector i Fall Prevention Wire e Video Output Connector o Decoration Cover r Data Port !0 Dome Cover t Power Cable...

  • Page 6: Setup

    SETUP Setup Menu Setup menus are shown in the diagram below. Various kinds of setup are available to have the camera fulfill your requirements. Menus are built in a hierarchical structure from the Setup menu at the top down to Manual Mask Area Selection at the bottom. These menus are described in the following pages for reference prior to setup.
  • Page 7 The keys (switches) to use for setup are as shown in the table below. The joystick on the connected con- troller may also be used for setup. The table also shows the functions versus the operations of the indi- vidual controllers. For further details, see the manual for the controller to be used. The switches and con- trols are abbreviated as SW and CTRL in the table.

  • Page 8: Setup Menu Description

    Setup Menu Description PRESET (1) Position (POSITION SET) POSITION SET adjusts the camera picture by panning, tilting, zooming and focusing. See page 15 for the setting. (2) Preset Identification (PRESET ID) A preset ID (identification of up to 16 alphanumeric characters) can be displayed on the screen. See page 16 for the setting.
  • Page 9 AUTO PAN KEY This setting assigns SEQ, SORT, AUTO PAN or PATROL (PLAY) to the AUTO key on the controller. After this setting, the AUTO key performs as assigned. Note: AUTO PAN LED on the controller does not light if other than AUTO PAN is assigned. DIGITAL FLIP ON/OFF Tilt range is limited within 0°...
  • Page 10 (6) Password Lock ON/OFF (PASSWORD LOCK ON/OFF) This setting controls access to the PRIVACY ZONE to be free or limited. If PASSWORD LOCK ON is selected, the (DIS) follows the PRIVACY ZONE ON or OFF set on the SPECIAL1 menu. (7) Cleaning ON/OFF This is for refreshing the electric-mechanical contacts built in the camera.
  • Page 11 Generally, when a light from the background is too strong such as a spotlight, all objects except the main object in the picture are displayed darker because the lens iris is adjusted with respect to strong brightness. This model ignores strong brightness by masking the source of the strong bright- ness, thereby main object is displayed clearly.

  • Page 12: Rs485 Communication

    (7) White Balance (WHITE BAL) You can select one of two modes for white balance adjustment as follows: • ATW (Auto Tracing White Balance) In this mode, the color temperature is monitored continuously and thereby white balance is set automatically. The color temperature range for the proper white balance is approximately 2 600 - 6 000K.

  • Page 13: Setting Procedures

    SETTING PROCEDURES The following setting procedures are described on the assumption that this model is used in combination with the WJ-SX550B matrix switcher and WV-CU550B system controller. In case of using other controller than the WV-CU550B, refer to the table on page 8. Menu Display D4 menu Setup Menu Display...

  • Page 14: Preset

    ** PRESET NUMBER SET ** 3 or 4. • The PRESET NUMBER SET menu indicates the 8 preset posi- tions (1 - 8) for the WV-CS554 combination camera. Position Setting 1-32 1. Move the cursor to POSITION SET on the preset setting menu and press the CAM (SET) key.
  • Page 15 3. Pan Offset PRESET NUMBER SET menu (1-32) If the camera is replaced with a new one, Pan Offset is used to ** PRESET NUMBER SET ** adjust its positions to be the same as before. Preset position data is uploaded by the controller that was once downloaded before the former camera was removed.
  • Page 16 2. Press the CAM (SET) key to display the preset ID setting menu. To enter a new PRESET ID 1. Move the cursor to the desired character using the joystick, and press the CAM (SET) key. 2. The selected character appears in the editing area. (The pointer in the editing area moves to the right automatically at this moment.) To enter a blank, select SPACE.
  • Page 17 To set a display position for a PRESET ID PRESET NO. 1* 1. Move the cursor to POSI and press the CAM (SET) key. The 0123456789 ABCDEFGHIJKLM display position set menu appears. NOPQRSTUVWXYZ ().,'":;&#!?= 2. Using the joystick, move the ID to the desired position on the +-*/%$ screen, then press the MON (ESC) key.

  • Page 18: Dwell Time Setting

    Dwell Time Setting Preset setting menu PRESET NO. 1* • Move the cursor to DWELL TIME and set a dwell time by moving the joystick to the left or right. Dwell time changes as follows: POSITION SET PRESET ID ALC/MANUAL DWELL TIME 1MIN 2MIN...

  • Page 19: Deleting Preset Positions

    Setup menu Deleting Preset Positions *** SET UP MENU *** 1. Move the cursor to PRESET 1 and select the position number to PRESET 1* be deleted by moving the joystick. HOME POSITION SELF RETURN 10MIN AUTO MODE AUTO PAN KEY AUTO PAN DIGITAL FLIP LOCAL/REMOTE...
  • Page 20 Setup menu Auto Mode Selection *** SET UP MENU *** 1. To set auto mode PRESET 1* Move the cursor to AUTO MODE and select a mode by moving HOME POSITION SELF RETURN 10MIN the joystick to the left or right. Modes change as follows: AUTO MODE AUTO PAN AUTO PAN KEY...

  • Page 21: Auto Pan Key Setting

    6. To set endless turn ON/OFF ** AUTO PAN ** Move the cursor to ENDLESS, and move the joystick to the left or POSITION SET START right to set endless turn ON or OFF. SPEED ••••|•••• ON: The camera pans from the start position to the end position, PAN LIMIT then keeps rotating in the same direction to return to the start ENDLESS...

  • Page 22: Local/Remote Setting

    Setup menu LOCAL/REMOTE Setting *** SET UP MENU *** • Move the cursor to LOCAL/REMOTE, and move the joystick to the PRESET 1* left or right. HOME POSITION SELF RETURN 10MIN You can toggle between LOCAL and REMOTE. AUTO MODE AUTO PAN KEY AUTO PAN Note: REMOTE does not work when the WV-RM70, WV-CU360 or...
  • Page 23 3-3 Move the cursor to PUSH SET on the ZOOM/FOCUS, then ZOOM/FOCUS setting menu press the CAM (SET) key. ** ZONE NUMBER 3*/8 ** →PUSH SET PAN/TILT →PUSH SET ZOOM/FOCUS U TILT D/L PAN R ZONE SCALE ••••|•••• SET DEL 3-4 Adjust zoom and focus, then press the CAM (SET) key.
  • Page 24 Special1 menu Area Title (AREA TITLE) ** SPECIAL1 ** Up to 8 area titles can be added in specific positions. PRIVACY ZONE ON (DIS) PROPO. P/T AREA TITLE ON (NESW) 1. Select ON (NESW), ON (USER) or OFF by moving the joystick to PATROL PLAY ALARM IN/OUT...
  • Page 25 Setting [ON (USER)] SPECIAL1 menu If ON (USER) is selected on the SPECIAL 1 menu, the Area Title ** SPECIAL1 ** PRIVACY ZONE ON (DIS) selection menu appears. The screen has the number column and PROPO. P/T AREA TITLE ON (USER) title column above RET and RESET.
  • Page 26 Patrol (PATROL) A routine of manual operations can be stored for up to 30 seconds SPECIAL1 menu and later reproduced repetitively. ** SPECIAL1 ** PRIVACY ZONE ON(ENB) PROPO.P/T PATROL AREA TITLE 1. For PATROL LEARN, set the following parameters for the starting PATROL PLAY ALARM IN/OUT...
  • Page 27 PATROL PLAY with a controller not having PATROL key 1. Close the SET UP or SPECIAL 1 menu. The camera turns to the starting point and the operations stored in the memory are reproduced. Iris operation only is accepted during playback. 2.
  • Page 28 COAXIAL ALARM OUT Alarm output signals are supplied through the coaxial cable. 1. Move the cursor to COAX and select ON or OFF. 2. Press the CAM (SET) key. ON: The camera sends an alarm output signal via the coaxial cable after it turns to a preset position.
  • Page 29 NEW PASSWORD NEW PASSWORD 4. To change the password in step 3-3 above, move the cursor from NEW PASSWORD? ** 0 1 2 3 4 5 6 7 8 9 OK to NEW PASSWORD then press the CAM (SET) key. NEW PASSWORD menu appears.
  • Page 30 Electric Zoom ON/OFF (ELE-ZOOM ON/OFF) The electric zoom magnifies a scene tenfold. With a twenty-twofold Special1 menu optical zoom lens, the camera is capable of 220-fold zoom (44-fold ** SPECIAL1 ** zoom for WV-CS554). PRIVACY ZONE ON (ENB) PROPO. P/T AREA TITLE...

  • Page 31: Camera Setting

    Setup menu Camera Setting *** SET UP MENU *** 1. To display the Camera Setting Menu PRESET 1* HOME POSITION • Move the cursor to CAMERA , and press the CAM (SET) key. SELF RETURN 10MIN AUTO MODE The camera setting menu is displayed. AUTO PAN KEY AUTO PAN DIGITAL FLIP...
  • Page 32 • The positioning of the CAMERA ID stops at the edges of the CAMERA ID screen. 0123456789 ABCDEFGHIJKLM • The CAMERA ID moves faster when the joystick is kept NOPQRSTUVWXYZ ().,'":;&#!?= pressed for more than 0.5 seconds. +-*/%$ • To return to SET UP for setting other items, move the cursor to SPACE POSI RET RESET RET, and press the CAM (SET) key.
  • Page 33 (2) ALC Mode with SUPER-D2 OFF Blinking 1. Move the cursor to the SUPER-D2 parameter and select OFF. (When you select MANUAL, SUPER-D2 is not available.) The item MASK SET appears on the menu. 2. Move the cursor to MASK SET and press the CAM (SET)key. The 48 mask areas appear on the monitor screen.
  • Page 34 4. Shutter Speed Setting (SHUTTER) Camera setting menu ** SET UP ** Note: When ON is selected for SUPER-D2 on the ALC CONT menu, CAMERA ID this item is not available. ALC/MANUAL SHUTTER To select electronic shutter speed, select OFF for SUPER-D2 in SENS UP the menu.
  • Page 35 7. Synchronization Setting (SYNC) Camera setting menu ** SET UP ** 1. Display SET UP on the monitor screen. CAMERA ID If necessary, refer to Setup Menu Display on page 14 for details ALC/MANUAL SHUTTER on displaying the SET UP menu on the monitor screen. SENS UP 2.
  • Page 36 8. Move the cursor to FINE by using the joystick. 9. Use the joystick to match the vertical phase for both video output signals as closely as possible. Notes: • When the “|” cursor reaches the “+” end, it jumps back to “–”. At the same time, COARSE is incremented by one step to enable a continuous adjustment.
  • Page 37 Camera setting menu (2) Automatic White Balance Control Mode (AWC) 1. Display SET UP on the monitor screen. ** SET UP ** CAMERA ID (Refer to Setup Menu Display on page 14 for details on displaying ALC/MANUAL SHUTTER the SET UP menu on the monitor screen.) SENS UP SYNC 2.
  • Page 38 Camera setting menu 9. Motion Detector Setting (MOTION DET) ** SET UP ** CAMERA ID ALC/MANUAL 1. Display SET UP on the monitor screen. SHUTTER (Refer to Setup Menu Display on page 14 for details on display- SENS UP ing the SET UP menu on the monitor screen.) SYNC WHITE BAL MOTION DET...
  • Page 39 Because the alarm signal is multiplexed on the video signal it may be mistakenly interpreted by other video equipment as a time code signal. Therefore, when this camera is not used in a Panasonic Intelligent CCTV System, select OFF to prevent the above from occurring.
  • Page 40 Camera setting menu 11. Special 2 Menu (SPECIAL2) Special Menu (SPECIAL) ** SET UP ** CAMERA ID ALC/MANUAL This menu lets you adjust and set up the picture quality to meet your SHUTTER requirements. SENS UP • Display SET UP on the monitor screen. SYNC WHITE BAL (Refer to Setup Menu Display on page 14 for details on display-...
  • Page 41 (5) BW ** SPECIAL2 ** CHROMA GAIN •••• •••• Move the cursor to BW and select AUTO, ON or OFF by moving AP GAIN •••• •••• PEDESTAL • ••••••• the joystick to the left or right. Default : OFF. ••••|•••• AUTO: The camera selects black and white mode if the picture is AUTO BURST(BW)

  • Page 42: Rs485 Set Up

    In an RS485 chain each unit must have a unique number. Default : 1. See INSTALLATION for DIP switch setting. SUB ADDRESS This is only applicable to Panasonic’s NEW protocol, reserved for future use with connection to personal computers. BAUD RATE Specifies the transmission speed (2 400, 4 800, 9 600, 19 200 bit per second) for the RS485 communica- tion.
  • Page 43 AUTO 1: Transmits the alarm data each time an alarm signal is received. AUTO 2 (Default): Transmits alarm data every 5 seconds. For Panasonic’s NEW protocol (reserved for future use with connection to the personal computers) OFF: Transmits alarm data in response to requests from the controller.

  • Page 44: Installation

    Protocol Selection shown in the table. 2. Switch off the camera. Panasonic’s conventional 3. Switch on the camera to read in the Panasonic’s NEW generation changed switch settings. Note: The changed communication Parameter Selection parameters are displayed on the Parity...
  • Page 45 Unit number Switch 1, an 8-bit DIP switch, specifies unit number for three protocols: Panasonic’s new and conven- tional protocol. When the unit number 1-32* or 1-96* is selected, it is set on the RS485 SETUP menu. 8-bit DIP SW For Panasonic’s NEW protocol...
  • Page 46 For conventional Panasonic’s protocol Unit Unit Unit Switch Position Switch Position Switch Position Number Number Number 1-96* (to be continued)
  • Page 47 For conventional Panasonic’s protocol Unit Unit Unit Switch Position Switch Position Switch Position Number Number Number...
  • Page 48 RS485 Setting Note: Remove sharp edges to protect the 4-bit DIP SW The 4-bit DIP switch in used for cables. RS485 termination and protocol selection. BP 1 Function Termination ON Switch Position Termination OFF b. Top cable exit BP 2 BP 3 BP 4 Function Prepare a hole in the ceiling board to run...
  • Page 49 3. Hook the Fall prevention wire on the camera 5. Tighten the fixing screw M3 (provided). mounting base. Notes : (1) Tighten the camera fixing screw with a screwdriver. (2) Follow the instructions given here to ensure that the camera and camera mounting base are installed safely.

  • Page 50: Connections

    CONNECTIONS Precautions • The following connections should be made by qualified service personnel or system installers in accordance with NEC 725-51. • Make sure to switch the camera off before installation or connection. 24 V AC 24 V AC Cable Data Port RS485 cable Coaxial Cable...
  • Page 51 • RS485 connection Brown T (B) Data Transmission Orange T (A) Yellow R (B) Data Reception Green R (A) Note: Use the cable that is described below for RS485 site communication. • Shielded, twisted pair cable • Low impedance • Wire gauge size is thicker than AWG #22 (0.33mm •...

  • Page 52: System Connections

    SYSTEM CONNECTIONS Combination Camera Max. 64 Cameras Matrix Switcher Personal Computer VCRs (up to 16) RS-232C Port CONTROL ALARM INPUT INPUT INPUT INPUT INPUT INPUT INPUT OUTPUT OUTPUT OUTPUT OUTPUT DATA VIDEO OUT1 VIDEO OUT1 VIDEO OUT1 VIDEO OUT1 VIDEO OUT1 VIDEO OUT1 VIDEO OUT1 RS-232C...

  • Page 53: Prevention Of Blooming And Smear

    SPECIFICATIONS General WV-CS854 WV-CS554 Power Required 24 V AC, 60 Hz Power Consumption 14 W Pick-up Device 755 (H) x 485 (V) pixels, Interline Transfer CCD Scanning Area 3.59 (H) x 2.70 (V) mm (equivalent to scanning area of 1/4”...

  • Page 54: Accessories

    Pan / Tilt WV-CS854 WV-CS554 Panning Range 360˚ Endless Panning Angle Setting Possible (in Auto Pan mode) Panning Mode Manual, Sequence, Sort, Auto Pan Manual: Approx. 0.1˚/s - 120˚/s, 8-step Manual: Approx.1˚/s - 24˚/s, 8-step / /16-step 16-step Panning Speed Sequence Mode: Maximum approx.

  • Page 55: Appendix

    APPENDIX Shortcuts Shortcut operations are available to controllers having the CAM FUNCTION key. Pressing numeric key(s) for one digit up to three digits then CAM FUNCTION key implements the respective functions as follows. The CAM FUNCTION key is abbreviated to [CAM FUNC] here. Function Function Selecting a PRESET position From #1 to #64...
  • Page 56 A Division of Matsushita Electric Corporation of America 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Panasonic Sales Company Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Division of Matsushita Electric of Puerto Rico Inc.

This manual is also suitable for:

Wv-cs854

Table of Contents