Lubricating The Gearbox - Stihl FS 100 RX Instruction Manual

Hide thumbs Also See for FS 100 RX:
Table of Contents

Advertisement

Available languages

Available languages

English
Checking the spark plug
Clean dirty spark plug.
N
Check electrode gap (A) and
N
readjust if necessary – see
"Specifications".
Rectify the problems which have
N
caused fouling of the spark plug.
Possible causes are:
Too much oil in fuel mix.
Dirty air filter.
Unfavorable running conditions.
WARNING
If the spark plug comes with a
detachable adapter nut (1), screw the
adapter onto the thread and tighten it
down firmly to reduce the risk of arcing
and fire.
26
Installing the spark plug
A
Screw the spark plug (3) into the
N
cylinder and fit the boot (2) (press it
down firmly).
1

Lubricating the Gearbox

1
2
Check the grease level regularly –
N
about every 25 hours of operation.
Unscrew the filler plug (1). If no
N
grease can be seen on the inside of
3
the filler plug, screw the tube (2) of
STIHL gear lubricant (special
accessory) into the filler hole.
Squeeze up to 5 g grease into the
N
gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
Remove the tube of grease (2).
N
Refit the filler plug (1) and tighten it
N
down firmly.
2
FS 100 RX

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents