I Reading In Scanned Data; G Konica Network Scanner Driver's Main Screen - Konica Minolta IP-421 Instruction Manual

I Reading in Scanned Data

TWAIN-equipped applications are used to read in scanned data. Select a TWAIN driver from your
application (the Konica Network Scanner Driver is selected in this procedure), select a scanner (copier
having scanned original) using the TWAIN driver, then enter the box number corresponding to the
scanned data so that the scanned data can be read in from the print controller's hard disk.
There are several TWAIN-capable applications on the market. In this manual, Adobe PhotoShop LE is
used to illustrate how to read in scanned data.

G Konica Network Scanner Driver's Main Screen

Displayed Information
[Box No.]
Shows the currently selected box number.
[Scanner Name]
Shows the currently selected scanner's name. Any desired name can be entered.
[Document]
Shows scanned data file numbers. Numbers are automatically assigned in sequence.
[Date & Time]
Shows the date and time each scanned data file was generated.
[Page]
Shows the total number of pages of each scanned data file.
[Size]
Shows the horizontal and vertical pixel numbers of the first page of each scanned data file.
[Resolution]
Shows horizontal resolution (dpi) of the first page of each scanned data file.
Chapter 5 Scanner
Print Controller INSTRUCTION MANUAL 5-11