Advertisement
G PC-FAX Features
The following describes the items available on the [FAX] tab.
[FAX] tab
Mode Selection
From [Mode Selection] you can choose [FAX] or [Printer].
Choose [FAX] when you are going to use the PC-FAX function.
Fax Mode Setup
This lets you select resolutions for fax send and set details of the relevant operation mode.
Two resolutions are available for fax send: [200 dpi] (equivalent of Fine mode) and [400
dpi] (equivalent of Super Fine mode).
In the [Setup] dialog box that opens when you click on the [Setup] button, you can set the
settings of [Print After Send], [Delay Transmission], [Sub Address] and [Sender ID].
[Print After Send], when checked, prints out the content of a file after it has been sent out.
[Delay Transmission], when checked, sends a fax at a predetermined time.
To predetermine a time, you can either directly type it in the [Send Time] box or can click
the [M] or [L] button next to the [Send Time] box.
[Sub Address] and [Sender ID], when checked, lets you enter a Sub Address and Sender
ID for sending a fax with F-code.
For Sub Address and Sender ID, refer to your Fax Kit User's Guide.
Chapter 7 PC-FAX
Print Controller INSTRUCTION MANUAL 7-3
Advertisement
