I Functions Of The Printer Setting; G Test Print Menu; G Controller Set - Konica Minolta IP-421 Instruction Manual

Chapter 4 Control Panel Setup

I Functions of the Printer Setting

G Test Print Menu

Select [1. Test Print Menu] on the Printer Menu screen to display the Setup screen.
Items on the LCD screen are as follows:
[1. PCL Demo Page]
Press [1] to print the PCL Demo Page immediately.
[2. PCL Font List]
Press [2] to print the Installed Font List immediately.
[3. Config. Data]
Press [3] to print the Config. Data immediately.
Items of the Config. Data are as follows:
• Version information (System software version)
• Current settings (Resolution / Print Quality / Copy mode timeout / Default Paper Size /
Language)
• Installed Paper (Tray1 / Tray2 / Tray3 / Tray4 / Bypass Tray)
• Device status (Total RAM installed / Hard disk free space)
• Miscellaneous (Total pages printed)

G Controller Set

Select [2. Controller Set] on the Printer Menu screen to display the Setup screen.
Items on the LCD screen are as follows:
[1. Banner Page]
Press [1] to set the Banner Page. Items on the Banner Page Set Screen are as follows:
• ON : prints the Banner Page antecedent to the set of print job
• OFF : (Default)
[2. Spool]
You can select whether or not print data spools to the printer's hard disk provided that a hard
disk is connected to the printer. The factory default is [1. ON].
• ON :
• OFF :
interpreter within print controller process the print job without spool
4-8 Print Controller INSTRUCTION MANUAL
spool waiting print job queue within HDD (Default)