Body Panels; Cycle Part; Standard - PEUGEOT Geopolis 250 Workshop Manual

Body panels

Front mudguard.
Handlebar cover.
Front shield panels.
Rear shield.
Bottom panel.
Floor panel.
Saddle storage compartment.
Rear panels.
Grab handle.
Rear mudguard.

Cycle part

Front wheel spindle.
Rear wheel bolt.
Rear wheel spindle nut.
Linkrod to engine pivot.
Linkrod to frame pivot.
Linkrod connecting pin
Linkrod to frame adjustment locknut
Linkrod to frame mounting bolt
Shock absorber top mount.
Shock absorber bottom mount.
Exhaust to cylinder head mounting nut.
Exhaust to casing mounting bolt.
Exhaust clamp.
Upper cone (in 2 operations).
Upper cone locknut.
Steering locknut.
Front brake caliper.
Rear brake caliper.
Front brake disc.
Rear brake disc.
Handle bar.

Standard

Nut and bolt 5 mm diameter.
Nut and bolt 6 mm diameter.
Nut and bolt 8 mm diameter.
Nut and bolt 10 mm diameter.
Nut and bolt 12 mm diameter.
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
TIGHTENING TORQUES
0.8 to 1.2 m.daN
0.2 to 0.4 m.daN
0.2 to 0.4 m.daN
0.2 to 0.4 m.daN
0.2 to 0.4 m.daN
0.4 to 0.6 m.daN
0.8 to 1.2 m.daN
0.2 to 0.4 m.daN
2 to 2.5 m.daN
0.4 to 0.6 m.daN
6.5 m.daN
10 m.daN
13.5 m.daN
5.8 m.daN
5.8 m.daN
3.6 m.daN
10 m.daN
6.8 m.daN
4.5 m.daN
4.5 m.daN
1.8 m.daN
2.5 m.daN
1.8 m.daN
4/2.2 m.daN
Hand tightened
7.5 m.daN
2.5 m.daN
2.5 m.daN
3 m.daN
0.9 m.daN
4 m.daN
0.6 m.daN
1 m.daN
2.2 m.daN
3.5 m.daN
5.5 m.daN
11