Yamaha FZ8NA Service Manual page 503

Diag-
nostic
code
No.
d:63 Malfunction code reinstate-
ment (for fault code No. d24
only)
• No malfunction code
• Malfunction code exists
d:70 Control number
Set the main switch to "OFF" to cancel the diagnostic mode.
TIP
Information about each diagnostic code No. is organized in this manual as follows:
• If a diagnostic code No. has a corresponding fault code No., the information is shown in TROU-
BLESHOOTING DETAILS. (Refer to "TROUBLESHOOTING DETAILS" on page 8-55)
• If a diagnostic code No. does not have a corresponding fault code No., the information is shown in
DIAGNOSTIC CODE TABLE. (Refer to "DIAGNOSTIC CODE TABLE" on page 8-107)
Item Meter display/Actuation
00
Fault code No. d24
• (If more than one code
number is detected, the dis-
play alternates every two
seconds to show all the
detected code numbers.
When all code numbers are
shown, the display repeats
the same process.)
0–254 [-]
FUEL INJECTION SYSTEM
8-108
Procedure
—
To reinstate, set the engine
stop switch from " " to
" ".
—