Yamaha FZ8NA Service Manual page 101

1. Immobilizer lead
2. Main switch lead
3. Left handlebar switch lead
4. Clutch cable
5. Clutch cable swaging metal
6. Left radiator fan motor lead
7. Water pump breather hose
8. Radiator stay
9. Horn
10.Right handlebar switch lead
11.Meter bracket
12.Brake hose
13.Throttle cables
14.Upper bracket
15.Horn lead
A. Order insignificant-immobilizer lead, main
switch lead and left handlebar switch lead.
B. Route the clutch cable to the radiator stay
concave.
C. Insert the clamp into the frame and clamp
the clutch cable. Position the clutch cable
swaging metal further to the front of the
vehicle than the clamp and face the clamp
opening to outside of the vehicle.
D. Clamp the clutch cable, left radiator fan
motor lead, and water pump breather hose
and face the head of the clamp to the top of
the vehicle and the end of the clamp to
inside of the vehicle. Use the position of
the cylinder head cover shown in the illus-
tration as a guide to install the clamp.
E. 45–65 mm (1.77–2.56 in)
F. Upper side of the vehicle
G. Inside of the vehicle
H. Clamp the horn lead to the front fork and
face the head of the clamp to rear of the
vehicle and the end of the clamp to the
inside of the vehicle.
I. The horn lead should be positioned in the
90° area.
J. Outside of the vehicle
2-52
CABLE ROUTING