802.11N Configuration Example - HP a-msr Configuration Manual

[AP] interface wlan-radio 2/0
[AP-WLAN-Radio2/0] radio-type dot11g
[AP-WLAN-Radio2/0] channel 1
[AP-WLAN-Radio2/0] service-template 1 interface wlan-bss 1
Verify the configuration
2.
The clients can associate with the APs and access the WLAN.

You can use the display wlan client and display connection commands to view the online clients.


802.11n configuration example

The following matrix shows the feature and router compatibility:
Feature
802.11n
Network requirements
As shown in
applications. The AP provides a plain-text wireless service with SSID service. 802.1 1gn is adopted to
inter-work with the existing 802.1 1g network and protect the current investment.
Figure 10 Network diagram for 802.11n configuration
Configuration procedure
Configure the Fat AP.
1.
# Create a WLAN BSS interface.
<AP> system-view
[AP] interface wlan-bss 1
[AP-WLAN-BSS1] quit
# Configure a clear type WLAN service template with no authentication.
[AP] wlan service-template 1 clear
[AP-wlan-st-1] ssid service
[AP-wlan-st-1] authentication-method open-system
[AP-wlan-st-1] service-template enable
[AP-wlan-st-1] quit
# Configure the bandwidth as 20 MHz, and bind WLAN-Radio 2/0 to service template 1 and WLAN-BSS
1.
[AP] interface WLAN-Radio 2/0
A-MSR900 A-MSR20-1X
Available for
routers with a
SIC_WLAN
No
module that
supports
802.11n
Figure 10, deploy an 802.1 1n network to provide high bandwidth access for multi-media
AP
Switch
A-MSR20 A-MSR30
Available for Available for
routers with a routers with a
SIC_WLAN SIC_WLAN
module that module that
supports supports
802.11n 802.11n
Client
21
A-MSR50
Available for
routers with a
SIC_WLAN
module that
supports
802.11n