Table of Contents
Advertisement
[Sysname] wlan service-template 1 crypto
[Sysname-wlan-st-1] ssid dot1x
# Enable the RSN IE in the beacon and probe responses, and use the CCMP cipher suite.
[Sysname-wlan-st-1] authentication-method open-system
[Sysname-wlan-st-1] cipher-suite ccmp
[Sysname-wlan-st-1] security-ie rsn
[Sysname-wlan-st-1] service-template enable
[Sysname-wlan-st-1] quit
# On interface WLAN-radio 2/0, bind service template 1 to interface WLAN-BSS 1.
[Sysname] interface wlan-radio2/0
[Sysname-WLAN-Radio2/0] radio-type dot11g
[Sysname-WLAN-Radio2/0] service-template 1 interface wlan-bss 1
Configure the RADIUS server (IMC PLAT 5.0)
2.
See
―Configure the RADIUS server (IMC PLAT
Configure the wireless card
3.
Double click the
icon at the bottom right corner of your desktop. The Wireless Network Connection
Status window appears. Click the Properties button in the General tab. The Wireless Network Connection
Properties window appears. In the Wireless Networks tab, select wireless network with the SSID dot1x, and
then click Properties. The dot1x Properties window appears. Then, in the Authentication tab, select
Protected EAP (PEAP) from the EAP type drop-down list, and click Properties. In the popup window, clear
Validate server certificate, and click Configure. In the popup dialog box, clear Automatically use my
Windows logon name and password (and domain if any). The configuration procedure is as shown in
19
through
Figure
21.
5.0)."
43
Figure
Advertisement
Table of Contents
