Table of Contents
Advertisement
# Configure AAA domain imc by referencing RADIUS scheme rad.
[Sysname] domain imc
[Sysname-isp-imc] authentication lan-access radius-scheme rad
[Sysname-isp-imc] authorization lan-access radius-scheme rad
[Sysname-isp-imc] accounting lan-access radius-scheme rad
[Sysname-isp-imc] quit
# Configure the MAC authentication domain.
[Sysname] mac-authentication domain imc
# Configure MAC authentication user name format, using MAC addresses without hyphen as username and
password (consistent with the format on the server).
[Sysname] mac-authentication user-name-format mac-address without-hyphen
# On interface WLAN-radio 2/0, bind interface WLAN-BSS 1 to service template 1.
[Sysname] interface wlan-radio2/0
[Sysname-WLAN-Radio2/0] radio-type dot11g
[Sysname-WLAN-Radio2/0] service-template 1 interface wlan-bss 1
Configure the RADIUS server (IMC PLAT 5.0)
2.
The following takes the IMC (the IMC versions are IMC PLAT 5.0 and IMC UAM 5.0) as an example to
illustrate the basic configurations of the RADIUS server.
# Add an access device.
Log in to the IMC management platform. Select the Service tab, and then select User Access Manager >
Access Device Management > Access Device from the navigation tree to enter the access device
configuration page. Click Add on the page to enter the configuration page as shown in
Input 12345678 as the Shared Key. keep the default values for other parameters.
Select or manually add the access device with the IP address 10.18.1.1.
Figure 15 Add access device
# Add service.
Select the Service tab, and then select User Access Manager > Service Configuration from the navigation tree
to enter the add service page. Then click Add on the page to enter the following configuration page. Set the
service name as mac, and keep the default values for other parameters.
40
Figure
15:
Advertisement
Table of Contents
