Step 10: Install Toekick; Step 11: Set Temperature Controls; Step 12: Start Icemaker - GE ZICS36N LH Installation Instructions Manual

10
Step
Install
Toekick
11
Step
Temperature
Controls
12
Step
Start
Icemaker
• A standard toekick is supplied. Install with 2
screws provided, adjust to desired height and
tighten screws.
Important: The vented toekick must remain unobstructed for
proper air circulation and operation.
• Set Fresh Food control at "5".
• Set Freezer control at "5".
Important : Allow 24 hours for temperatures to stabilize before
making adjustments.
• Lower the feeler arm to the ON position
and the icemaker will begin operation
automatically.
• Discard the first few batches of ice cubes to
be sure that any remaining impurities in the
water line will be flushed out.
NOTE: During operation, you will hear the
hum of the motor, movement of the cube
ejector, humming or clicking of the water
valve, and ice falling into the bin. These
sounds are normal.
Installation
36" Stainless Bottom Mount Refrigerators
5 IS NORMAL
9 IS COLDEST
FREEZER
5 IS NORMAL SET HERE IF MOISTURE
OFF
9 IS COLDEST APPEARS ON EXTERIOR
FRESH FOOD
ENERGY SAVER
13