Step 9: Mount Top Grille Panel - GE ZICS36N LH Installation Instructions Manual

9
For shipping purposes, the top case trim is
secured at 84" installation height.
To raise case trim to 84-1/2" installation
Step
height or to lower case trim to 83-1/2":
Mount
• Loosen 2 screws on both sides and raise or
Top Grille
Panel • Tighten all 4 screws.
• Mount the grille panel by dropping into
The grille panel assembly is factory set for an
84" installation height. If installation height
is 83-1/2" or 84-1/2", order ZGCSS36RH
(right hand) or ZGCSS36LH (left hand)
grille panel kit.
lower the top case trim to meet soffit
height or to the top of adjacent cabinets.
slots on the case trim.
Installation
36" Stainless Bottom Mount Refrigerators
Top
Case
Trim
Raise To
Installation
Height
1-1/2"
min.
gap
Important: Maintain 1-1/2" min. gap between top of
doors and bottom of grille panel.
Screws
12