Panasonic DP-8060 Operating Instructions Manual page 188

Info. Code
634
638
711
712
714
715
716
717
718
719
720
721
188
Downloaded From ManualsPrinter.com Manuals
Problem Solving
Information Code
Meaning
Redial was not successful due to no response from
the called station or wrong number dialled.
Note: If busy tone was not detected, the machine will
only redial once.
Power failure occurred during the communication.
Incorrect LDAP settings.
Incorrect email address.
Cannot Log on to the LAN.
TCP/IP connection timed out.
Cannot logon to the designated SMTP Server.
Incomplete SMTP Protocol transmission. SMTP
Server's hard disk may be full.
Page Memory Overflow occurred while receiving
printing data. The paper size selected within your
application to print is larger than the paper size
loaded in the tray(s).
Received data via LAN is in a format that is not
supported.
Cannot connect to the POP Server. (Incorrect POP
Server IP Address) POP Server is down.
Cannot connect to the POP Server. (User Name or
Password error)
Possible Action
Check the telephone number and send again.
Check the power cord and plug.
Check the LDAP Server Name, LDAP Log in
Name, LDAP password, LDAP Search Base.
Check the registered email address.
Check the IP Address of the SMTP Server
with the Network Administrator.
Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.
Check the Internet Fax parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.
Check the SMTP Server IP Address setting.
Contact the Network Administrator.
SMTP Server is defective.
Contact the Network Administrator.
Check the document size and resolution.
Ask originator to re-send in a supported size
and resolution.
Ask the originator to re-send with a supported
file attachment format:
* In a TIFF-F format.
* Image data conforming to recording paper
size.
Check the POP Server IP Address.
Contact the Network Administrator.
Check the POP User Name and Password or
the APOP settings.
Contact the Network Administrator.
Page
---
---
54
---
---
---
---
---
---
---
---
---