Panasonic DP-8060 Operating Instructions Manual page 175

3
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result
(5) Number of pages transmitted : The 3-digit number is the number of pages successfully transmitted or received.
or received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication Start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
NOTE 2. Email transmission sent to multiple locations is recorded as a single transaction on the Journal.
Downloaded From ManualsPrinter.com Manuals
4
You can view the transactions in the journal
by pressing
: "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"P-OK" indicates that memory overflow occurred while storing the documents into memory
for transmission but successfully stored document(s) was sent.
"R-OK" indicates that the Relayed XMT was successful.
"B-OK" indicates that the Batch Transmission was successful.
"- -" indicates LAN transmission.
"3-digit Info Code" (See page 186) indicates that the communication has failed.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully transmitted. The
second 3-digit number represents the total number of pages that were attempted to be
transmitted.
Asterisk "*" indicates that the quality of some received copies was poor.
: 001 to 999 (When the communication is stored into memory, a file number is assigned for
each communication.)
: "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"PLD" means Polled
"FWD" means Fax Forward
: Name: Recorded name in the Address Book or remote station's Character ID.
number : Dialled telephone number. (PIN code will not be shown)
Number: Remote station's ID number.
Email address
: For service personnel only
: Up to 25 characters
: Up to 20 digits
: Up to 16 characters
: to print a Journal
: to view transmission
transactions only
: to view all transactions
or .
5
• To return
the machine to the
initial screen of the
current active mode.
175