Setting Up Your Machine As An Internet Relay Station - Panasonic DP-8060 Operating Instructions Manual

■ Setting Up Your Machine as an Internet Relay Station

To set up your machine as a Relay Station, the following parameters must be set properly.
1. Relay XMT (Fax Parameter No. 142)
Selecting whether the machine will accept and performs G3 relayed transmission. (See page 171)
1) Invalid - Machine will not accept a Relay XMT request.
2) Valid - Machine will accept a Relay XMT request.
2. Relay XMT Report (Fax Parameter No. 143)
Selecting how the COMM. Journal for relayed transmission is sent to the originator.
1) Off - Do not send
2) Always - The COMM. Journal is always sent after a Relay Communication is completed or has failed.
3) Inc. only - The COMM. Journal is sent if the Relay Communication to the destination has failed.
3. Relay XMT Password (User's Parameter) (See note 3)
Enter a Relay XMT Password (up to 10 characters), to be used for protection against unauthorized (outside) stations from
accessing your machine to relay messages to a G3 fax machine via PSTN. This password should be given out to authorized
people only.
4. Relay Address (Auto Dialer)
Enter the address book station that will assign the Relay Email Address of the Relay Station your machine will use.
5. Manager's Email Address (User's Parameter)
Register the Department Manager's Email Address for supervision and cost control purposes. Once registered, the machine
will send an email notification to this email address for each Relayed XMT Request received from a remote station. The
following information is sent.
(From : The email address of the originating station.)
(To : The telephone number of the destination G3 fax machine.)
6. Domain Names (User's Parameter) (See note 4)
Register up to 10 Domain Names (up to 30 characters) that your machine will accept Relayed Transmission Requests to
relay a message to another G3 fax machine via PSTN.
Ex: Registered Domain Names
(01): panasonic.co.jp
(02): abc.ifax.com
(03): panasonic.com
In the example above, the Relayed XMT Request will be accepted only from the email addresses that include the Domain
Name of panasonic.co.jp, abc.ifax.com or panasonic.com.
NOTE 3. This should be different than your machine's Email Address used to receive regular email or Internet
4. If all the Domain Names are left blank, the Internet Fax will accept Relayed XMT Requests from any
Downloaded From ManualsPrinter.com Manuals
Fax, as your machine's Email Address is always included in the header of all email messages sent.
Anyone receiving an Internet Fax from the machine will easily know the Relay XMT Password if it is the
same as the Email Address.
domain.
149