Advanced Gateway Setup - Port Filtering - Ubee ddw3611 User Manual

3.10 Advanced Gateway Setup - Port Filtering

3.10 Advanced Gateway Setup - Port Filtering
The Port Filtering option allows you to configure port filters in order to block specific
internet services on specific ports to all devices on the LAN.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click Port Filtering from the left side of the screen. The Port Filtering fields are
explained following this screen example.
Label
26
Start Port
End Port
Protocol
Enabled
Apply
page 7, if needed.
Description
Enter the start port.
Enter the end port.
Select the protocol type, or select Both for UDP and TCP.
Select Enabled to active the rule and filter out all traffic on the
specified ports.
Click Apply to save all screen changes.
DDW3611 Subscriber User Guide • May, 2010
Ubee Interactive