Advanced Gateway Setup - Ip Filtering - Ubee ddw3611 User Manual

Ubee Interactive
3.9

Advanced Gateway Setup - IP Filtering

The IP Filtering option allows you to filter IP addresses in order to block internet
traffic to specific network devices on the LAN. Any host listed on this list will not be
accessible to internet traffic.
1. Access the web interface. Refer to
2. Click the Gateway link from the top of the screen.
3. Click IP Filtering from the left side of the screen. The IP Filtering fields are
explained following this screen example.
Label
DDW3611 Subscriber User Guide • May, 2010
Clear
View Additional Rules:
Apply
Start Address
End Address
Enabled
Apply
Select Clear to delete the filtering rule.
Select from the pull-down to display the remaining 10 rules, if
they exist. 20 rules total are supported.
Click Apply to save all screen changes.
page 7, if needed.
Description
Enter the start IP address.
Enter the end IP address.
Select Enabled to activate the rule.
Click Apply to save all screen changes.
3.9 Advanced Gateway Setup - IP Filtering
25