Ubee ddw3611 User Manual page 52

5.1 User Setup
Label
48
User Configuration/Add
User/Remove
User/Enable
Password
Re-Enter Password
Trusted User
Content Rule
White List Access Only
Time Access Rule
Session Duration
Inactivity Time
Apply
Trusted Computers
Add
Remove
Description
Select an existing user account to edit from the User Settings
pop-up menu. Or, enter a new user name and click the Add
button. To activate the user, click the Enable button. To remove
a user, select a user from the pop-up menu and click the
Remove button.
Enter the password for this user. It is required when this user
tries to access the Internet via the wireless router.
Re-enter the password as required.
Click the Enable checkbox to allow the selected user to be
trusted user. That means the user is now limited to timing and
content when visiting Internet, as defined in the following
fields.
Select from the pop-up menu an existing content rule that
defines what kind of websites the user can visit or not.
If you have created a content rule which defines a black list
and white list, then you can select the White List Access Only
checkbox to force the wireless modem to execute the policy
for the selected user
Select a defined time access rule to apply to the selected user.
Enter a time in minutes for the user's session expiration. Upon
expiration, the user can log back in for the same session
duration.
Enter the time out value when a user has no activity on the
Internet. When the time expires, the user interface to the
internet cancelled.
Click to save all changes.
Define the trusted hosts that will bypass the Parental Control
Process.
Enter the trusted host's MAC address and click the Add button
to save.
To remove a trusted computer, highlight it from the list and
click the Remove button.
DDW3611 Subscriber User Guide • May, 2010
Ubee Interactive