Rear Panel Connections - Elektron analog drive User Manual

7. LEVEL sets the pedal's overall output level.
8. HIGH adjusts the amount of boost or cut of the EQ (equalizer) high frequencies.
9. [FOOTSWITCH RIGHT]
10. MID adjusts the amount of boost or cut of the EQ mid frequencies.
11. <ACTIVE> indicates if the pedal is active or bypassed.
12. [FOOTSWITCH BYPASS/SELECT]
13. MID FREQ adjusts the parametric EQ mid frequency.
14. [FOOTSWITCH LEFT]
15. LOW adjusts the amount of boost or cut of the EQ low frequencies.

2.2 REAR PANEL CONNECTIONS

1. Input. Audio input. Use 1/4" mono phone plug.
2. Output. Audio output. Use 1/4" mono phone plug.
3. Exp Gain. Input for expression pedal or CV to adjust the input signal gain. Use 1/4" mono phone
plug for CV signals.
4. Exp Mid. Input for expression pedal or CV to adjust the MID FREQ. Use 1/4" mono phone plug for
CV signals.
5. MIDI In. MIDI data input. Use standard MIDI cable to connect to MIDI Out of an external MIDI unit.
6. MIDI Out. (Also functions as MIDI Thru) MIDI data output. Use standard MIDI cable to connect to
MIDI In of an external MIDI unit.
7. Kensington Security Slot. For connecting a Kensington lock and cable.
8. Power inlet. Use the included PSU-3b power adapter, connected to a power outlet.
10
1 2 3
Input Output Exp Gain Exp Mid
4 5 6 7
MIDI In MIDI Out
12 VDC 1 A
8