Toyota 2013 Rav4 Owner's Manual page 47

66
1-1. For safe use
Installing child restraints using a seat belt (child restraint lock
function belt)
Rear-facing ⎯ Infant seat/convertible seat
■
1
Adjust the seatback to the
8th lock position from the
fully reclined position.
(→P. 139)
1
Fully reclined position
2
8th lock position
If your child restraint system interferes with a head restraint and
cannot be installed properly, install the child restraint system after
removing the head restraint. (→P. 147)
2
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
3
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
RAV4_OM_OM42809U_(U)