Toyota 2013 Rav4 Owner's Manual page 333

370
5-2. Using the audio system
Changing the passkey
1
Select "Passkey" using the "TUNE•SCROLL" knob.
2
Select a 4 to 8-digit passkey using the knob.
Input the number 1 digit at a time.
3
When the entire number to be registered as a passkey has been
input, press
If the passkey to be registered has 8 digits, pressing
necessary.
Setting automatic connection of the device on or off
If "BT power" is set to on, the registered device will be connected
automatically when the engine switch is turned to the "ACC" position
(vehicles without a smart key system) or ACCESSORY mode (vehi-
cles with a smart key system).
1
Select "BT Power" using the "TUNE•SCROLL" knob.
2
Select "ON" or "OFF" using the knob.
Displaying the device status
Select "Bluetooth
● Displaying the device name
Select "Device name" using the "TUNE•SCROLL" knob.
● Displaying the device address
Select "Device address" using the "TUNE•SCROLL" knob.
*
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
RAV4_OM_OM42809U_(U)
(ENTER).
*
info" using the "TUNE•SCROLL" knob.
(ENTER) is not