Toyota 2013 Rav4 Owner's Manual page 442

480
6-3. Do-it-yourself maintenance
6
Set the connector.
After installing the connector,
shake the bulb base gently to
check that it is not loose.
7
Set the connector and install
the cover.
Before installing the cover, turn
the headlight low beams on
once and visually confirm that
no light is leaking through the
mounting.
8
For the right side only: Move the washer tank inlet and install the
securing clip.
■
Daytime running lights/headlight high beams
1
For the right side only: Remove the securing clip. Then move the
washer tank inlet. (→P. 478)
2
Turn the bulb base counter-
clockwise.
3
Unplug the connector while
pressing the lock release.
RAV4_OM_OM42809U_(U)