Toyota 2013 Rav4 Owner's Manual page 375

■
Repair and replacement
It is recommended that genuine Toyota parts be used for repairs to ensure
performance of each system. If non-Toyota parts are used in replacement or if
a repair shop other than a Toyota dealer performs repairs, confirm the war-
ranty coverage.
■
Reset the maintenance data (U.S.A. only)
After the required maintenance is performed according to the maintenance
schedule, please reset the maintenance data.
To reset the data, follow the procedure described below:
Vehicles without a smart key system
1
Switch the display to the trip meter A (→P. 90) and then turn the engine
switch to the "LOCK" position.
2
While pressing the "DISP" button (→P. 90), turn the engine switch to the
"ON" position (do not start the engine because reset mode will be can-
celed).
3
Continue to press and hold the button until the trip meter displays "000000".
Vehicles with a smart key system
1
Switch the display to the trip meter A (→P. 90) and then turn the engine
switch off.
2
While pressing the "DISP" button (→P. 90), turn the engine switch to IGNI-
TION ON mode (do not start the engine because reset mode will be can-
celed).
3
Continue to press and hold the button until the trip meter displays "000000".
■
Allow inspection and repairs to be performed by a Toyota dealer
●
Toyota technicians are well-trained specialists and are kept up to date with
the latest service information. They are well informed about the operations
of all systems on your vehicle.
●
Keep a copy of the repair order. It proves that the maintenance that has
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly take
care of it.
RAV4_OM_OM42809U_(U)
6-2. Maintenance
413
6