Toyota 2012 Highlander Owner's Manual page 37

1-2. Opening, closing and locking the doors
■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
STEP 1
Vehicles without smart key system:
Close all the doors and turn the engine switch to the "ON"
position. (Perform step 2 within 10 seconds.)
Vehicles with smart key system:
Close all the doors and switch the "ENGINE START STOP"
switch to IGNITION ON mode. (Perform step 2 within 10 sec-
onds.)
STEP 2
Function
Shift position linked door lock-
ing function
Shift position linked door
unlocking function
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
58
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch (
approximately 5 seconds and
then release it.
The shift lever and switch posi-
tions corresponding
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Shift lever position
P
N
or
) for
to
Driver's door lock
switch position
the