Toyota 2012 Highlander Owner's Manual page 524

5-2. Steps to take in an emergency
Stowing the flat tire, jack and all tools
STEP 1
Remove the center wheel ornament by pushing from the
reverse side.
STEP 2
STEP 3
Turn the spare tire clamp bolt clockwise with a jack handle
and adapter socket until you hear a click.
STEP 4
Stow the jack and all tools.
■
After completing the tire change
The tire pressure warning system must be reset. (→P. 480)
550
Put the flat tire on the ground
with the outer side facing up and
install the holding bracket.
Be careful not to lose the wheel
ornament.