Toyota 2012 Highlander Owner's Manual page 274

3-2. Using the audio system
Setting station presets (excluding XM
STEP 1
Search for desired stations by turning
pressing "
STEP 2
Press and hold the button (from
is to be set to until you hear a beep.
Type B and C: Each time
changed. There are a total of 6 pages.
Scanning radio stations (excluding XM
■
Scanning the preset radio stations
STEP 1
Press and hold
Preset stations will be played for 5 seconds each.
STEP 2
When the desired station is reached, press
■
Scanning all radio stations within range
STEP 1
Press
All stations with reception will be played for 5 seconds each.
STEP 2
When the desired station is reached, press
■
Displaying radio text messages (for type B and C, FM mode
only)
When a new radio text message is received, "MSG" is shown on
the display. To display the message, press
If the text continues past the end of the display, "
and hold
Text messages are not displayed while driving.
298
∧
" or "∨" on
until you hear a beep.
.
until you hear a beep.
®
Satellite Radio)
.
to
is pressed, station pages are
®
Satellite Radio)
" is displayed. Press
or , or
) the station
once again.
once again.
.