Toyota 2012 Highlander Owner's Manual page 177

■
Returning to the previous screen
Select "RETURN" on the menu screen. Press and hold the "DISP"
button until the display changes.
■
System check display
Vehicles without smart key system
After the engine switch is turned to the "ON" position, "SYSTEM CHECK" is
displayed while system operation is checked. When the system check is
complete, the normal screen will return.
Vehicles with smart key system
After the "ENGINE START STOP" switch is turned to IGNITION ON mode,
"SYSTEM CHECK" is displayed while system operation is checked. When
the system check is complete, the normal screen will return.
■
Liquid crystal display
Small bright spots or dots may appear on the liquid crystal display. This is a
particular characteristic of liquid crystal displays and does not indicate a mal-
function. No action is required.
■
Outside temperature display
When stopped, or driving at low speeds (less than 12 mph [20 km/h]), the
correct outside temperature may not be displayed, or the display may take
longer than normal to change.
■
Customization that can be configured at Toyota dealer
Setting of language selection can be changed.
(Customizable features →P. 602)
NOTICE
■
The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
2-2. Instrument cluster
199
2